New Zealand Building Code changes: E3/AS1






The New Zealand Building Code changes: E3/AS1 Acceptable Solutions



Bamboo flooring in wet areas such as kitchens, laundries and toilet areas

The information below outlines the requirements to ensure that the installation of bamboo flooring in kitchen, laundry and toilet rooms complies with the New Zealand Building Code as an “Acceptable Solution”.

Introduction

With the latest change to the E3/AS1 Acceptable Solutions building code (which came into effect 4th November 2021) the number of flooring options that are considered an acceptable solution in wet areas has dropped to three (from seven) and excludes timber and timber based products – like bamboo flooring.

This means that from 5 November 2021, additional Building Code changes came into effect, impacting how wood (and bamboo) flooring is to be specified in wet areas. This change is only relevant to timber flooring being specified in wet areas such as kitchens, bathrooms, toilets and laundries – so does not include living areas, dining spaces, hallways, bedrooms and the like.

Kitchens are now included as areas that have sanitary fixtures, and floor finishes falling outside those covered in the Amendment 7, require an Alternative Solution to satisfy the Building Consents Authority (BCA).

Any projects consented prior to 4th of November 2021 are exempt because both Amendment 6 and 7 are a means of compliance.

The above changes were made so the Acceptable Solution (E3/AS1) better aligns with the requirements of the Building Code which states in Section E3.3.3 

“Floor surfaces of any space containing sanitary fixtures or sanitary appliances must be impervious and easily cleaned”.

Product: Plantation Compressed Bamboo Flooring & Bamboo Elite Flooring

When used in accordance with the below installation methods, the above bamboo flooring products may be used in kitchens, laundry and toilet rooms (wet areas) as an Alternative Solution (as defined below.)

Service History

Plantation Bamboo have supplied in excess of 80,000m2 of bamboo flooring products in the NZ market for over 16 years across a range of residential (and some commercial) applications.

The majority of customer installations have been successfully fitted in kitchen areas, with proven results.  In addition, bamboo flooring has been used extensively over a long period of time in global markets including installations in kitchens and laundries.

Surface layer and joint system

Plantation bamboo flooring features an impervious and easily cleaned surface, being pre-finished with multiple layers of UV applied coatings. In addition, the locking system, (on all four edges of each board) provides a tight glueless joint, with a wax coating that inhibits ingress of moisture without the need for additional sealing. This provides splash protection.

Installation in “wet areas”

In order to meet the Alternative Solution requirements, when bamboo flooring is being installed in kitchens, laundries or toilets the following additional safeguards (in addition to the normal installation instructions) should be carried out within at least a 1.5 metre radius of the water source in that room:

After installation of the bamboo flooring is complete, a thin bead of waterproof flexible sealant should be applied to the perimeter of the bamboo flooring, to seal where the floor meets the skirting boards or cabinetry (“toe kicks”, etc), along with any penetrations of the flooring (pipes etc).

Waterproof Membrane

For “floating floor” installation – prior to installation of bamboo flooring on a concrete slab or other sub-floor, a waterproof membrane/underlay is required (such as Roberts First Step 3 in 1 underlay)

For direct fix (glue down) installation – the subfloor needs to be sealed with a suitable waterproof membrane.

See the relevant installation instructions for more detailed information.

Easily Cleaned

Bamboo flooring is easily cleaned with a broom, standard vacuum or damp micro-fibre mop. Please refer to the cleaning and care instructions

Contact Us
close slider